-40%

New SIMPSON STRONG-TIE POST BASE ZMAX ABU66Z Galvanized Adjustable Standoff 6x6

$ 20.85

Availability: 47 in stock
  • Finish: Galvanized
  • MPN: ABU66Z
  • Number in Pack: 1
  • System of Measurement: Inch
  • All returns accepted: ReturnsNotAccepted
  • Model No.: 5606785
  • Brand: Simpson Strong-Tie
  • Material: Galvanized Steel
  • Model: ABU66Z
  • Condition: New
  • Holes per Leaf: 1
  • UPC: 44315119606

    Description

    These will be taken out of their plastic blister case and shipped bare with all the original components. This is to save us both on shipping.
    Post and Column Bases secure the bottom of posts or columns to concrete and are perfect for decks or patio covers. Models are available for attaching to existing hardened concrete, wet concrete, as well as wood. The AB series also offers adjustability around the anchor bolt to achieve optimum post placement. And many models provide a 1 in. standoff from the concrete to help avoid post-end rot from moisture.
    Attaches a post to existing concrete for decks, patio covers and other top-supported structures
    Features 1 in. standoff to help prevent rot at post end
    Slotted for adjustability
    Designed for versatility, cost-effectiveness and maximum uplift performance
    Nominal post size: 6 in. x 6 in.
    Made from 10-Gauge steel
    Z-MAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
    Install with 16d common nails
    Specifications
    Dimensions
    Nominal Post Size (in.)
    6x6
    Product Depth (in.)
    5
    Product Height (in.)
    6.0625
    Product Width (in.)
    5.5
    Details
    Base Type
    Standoff Post Base
    Connector Finish
    G185 Galvanized
    Fasteners Included
    Fasteners Not Included
    Features
    No Additional Features
    Gauge
    12
    Material
    Steel
    Material Connector Compatibility
    Wood to Concrete
    Number of Pieces
    1
    Package Quantity
    1
    Product Weight (lb.)
    4.87
    Installation:
    Place the base, load transfer plate and nut on the anchor bolt. Loosely tighten the nut.
    Place the standoff base and then the post in the ABU.
    Fasten using Nails or Bolts - Use only the specified fasteners below.
    This 6x6 post base requires the following fasteners for installation: (1) – 5/8” concrete anchor, (12) -
    16d x 3-1/2” Common Nails
    or (2) – ½” Machine Bolts (Use nails
    OR
    bolts.
    DO NOT
    install nails and bolts together!)
    Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports).