Kidde Smoke and Carbon Monoxide Detector with Voice Warning Model # i12010SCO

Description

Kidde Smoke and Carbon Monoxide Detector with Voice Warning Model # i12010SCO
Features:
Provides protection from two hazards - Fire and CO in one unit with 10-year sealed lithium battery backup.
Sealed-in lithium battery backup - No battery replacement required over the 10 year life of the alarm. Eliminates worry about removal or unauthorized deactivation of alarm.
Voice warning system - Verbally announces “Fire” or “Warning, Carbon monoxide” to help distinguish between threats. Audio alarm: 85 dB at 10 feet
Ionization sensing technology - Ideal for detecting fast flaming and other types of fires. Temperature Range: 40 degree F (4.4 degree C) to 100 degree F (37.8 degree C)
Hush feature - Temporarily silences nuisance alarms for approximately 9 minutes and will not allow hush mode unless the unit is in alarm mode. Interconnects - Up to 24 Kidde devices (of which 18 can be initiating).Flashes once every 60 seconds to indicate battery only mode
Compatible with Kidde, FireX, code one and sentinel products
Description:
The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm that contains a 10-year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms.
The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor – which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires – with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one.
This constant communication enhances the alarm’s overall performance in all fires, and significantly reduces the potential for a nuisance alarm. Peak Level Memory-Announces “CARBON MONOXIDE PREVIOUSLY DETECTED” if alarm has detected CO level of 100ppm or higher since it was last reset. Humidity Range - 10%-85% non-condensing relative humidity (RH)