CROWN MACRO-TECH 2400 STEREO POWER AMPLIFIER-PIP-FXT XLR INPUT CARD-WORKS! 2100W

Description

This is an opportunity to own a great working Crown Macro Tech MA2400 stereo power amplifier with a PIP-FXT XLR input card.  This piece looks good and shows normal signs of use.  It powers on, passes audio clearly, the selectors work, and the volume pots work and are not scratchy.  It does have some rack rash.  It has been well taken care of in a pet free, temperature controlled environment.  It provides a total of 2070 watts bridged into 4 ohms, 1585 watts bridged into 8 ohms, or 2100(2x1050)wpc at 2 ohms stereo or 1600(2x800)wpc at 4 ohms.  It will be a great piece for someone.  You get exactly what you see pictured.   It measures 19" x 16" x 3.5" and weighs a hefty 52 lbs.
Please read below for more information from Crown about this great piece:
Crown MA2400 Macro-Tech Power Amplifier
The Crown® Macro-Tech® Series is the defining standard for amplifier design today. No compromises, no gimmicks. Just brilliant engineering backed by superior manufacturing, support, and an unsurpassed commitment to quality. Like all Crown amps, the defining characteristic of the Macro-Tech Series is sonic accuracy. A tight, rock-solid low end, with smooth, detailed highs and a well-defined midrange. In short, the most accurate reproduction of an audio signal you’ve ever heard. And because we put the quality of sound above all else, a Crown is the most coveted amplifier in the business.
Features:
Patented ODEP® (Output Device Emulation Protection) circuitry compensates for overheating and overload.
IOC® (Input/Output Comparator) circuitry immediately alerts of any distortion exceeding 0.05%, providing dynamic proof of distortion-free performance.
Crown’s Grounded Bridge™ design delivers large voltage swings without using easily stressed output-transistor configurations like conventional amplifiers.
PIP™ (Programmable Input Processor) connector accepts accessory modules that tailor the amplifier to suit specific applications.
Very low harmonic and intermodulation distortion results in the best dynamic transfer function in the industry.
Full protection from shorted, open, and mismatched loads, general overheating, DC, high-frequency overloads, and full protection from internal fault are provided by our latest “Quad-Mute” protection scheme.
Specifications:
Output Power:
520W/Ch 8 Ohms
800W/Ch 4 Ohms
1050W/Ch 2 Ohms
1585W Bridged Mono 8 Ohms
2070W Bridged Mono 4 Ohms
1605W Parallel Mono 2 Ohms
2080W Parallel Mono 1 Ohm
Sonic Performance:
Signal/Noise: 105 dB A-weighted
Damping Factor: >1000 From 10 to 400 Hz
Slew Rate: >13V/μSec Stereo
IMD: <0.05% At Rated Output
THD: <0.1% At Rated Output
Frequency Response: ±0.1 dB From 20 Hz to 20 kHz at 1W at 8 Ohms
Phase Response: ±10° From 10 Hz to 20 kHz
Input Impedance: 20 kOhm Balanced, 10 kOhm Unbalanced
Output Impedance: <10 mOhm In Series With <2 μH
Controls & Indicators:
Front Panel: On/Off Switch, Level Controls, Power Indicator, SPI/IOC Indicators, ODEP Indicators
Rear Panel: Stereo/Bridged Mono/Parallel Mono Switch. All: Ground Lift Switch.
Internal: Sensitivity Switch (26 dB/0.775V/1.4V Selection)
Connectors:
Input: TRS 1/4" Phone Jack Standard; XLR standard with P.I.P.-FX,
Output: Dual Binding Post (Banana Jack)
Structural:
Weight: 52 lbs.
Dimensions: 3.5” x 19” x 16” (2U)
Cooling: Forced Air Fan
AC Power: 120V 60Hz with Nema 20A power plug. Modifiable to other line voltages.
***PLEASE NOTE:  The shipping cost shown is for the continental US only.  Please email me for a quote to a US territory or Alaska, Hawaii, etc.
Please email me with any questions.  I used a high resolution camera to give you accurate pictures of its condition.  I have years of experience packaging delicate electronics, so rest assured, this will be packaged very well.  I also use high quality packaging materials.  Also, please check out the other items in my store.  Thank you for looking and God bless!