-40%

ATI DDA124-BNC 1x24 AES Digital Audio Distribution Amplifier 75 Ohm BNC S/PDIF

$ 85.74

Availability: 100 in stock
  • Condition: Used, in good condition and fully working. The photos show the actual item for sale. No unpictured cables, accessories or documents are included.
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • MPN: DDA124-BNC
  • Type: Distribution Amplifier
  • UPC: Does Not Apply
  • Refund will be given as: Money Back
  • Brand: ATI Audio
  • Return shipping will be paid by: Seller

    Description

    ATI DDA124-BNC 1x24 AES Digital Audio Distribution Amplifier 75 Ohm BNC S/PDIF
    Used, Good Condition
    Photos show the actual item for sale
    Description
    The ATI Audio DDA-124BNC is a 1x24 AES/EBU digital audio distribution amplifier. AES/EBU digital audio is distributed via 24 outputs from a single AES/EBU source.
    The DDA-124BNC uses 75 ohm BNC connectors on the single input and all 24 outputs. Sample rates from 27 to 96kHz are decoded and cleanly regenerated. Standard sample rates of 32, 44.1, 48, 88.2, and 96kHz are indicated with front panel numeric readouts. The numeric display also provides signal status and error message information.
    Further information may be obtained from the
    User Manual
    1x24 AES/EBU Distribution AES/EBU digital audio is distributed via 24 outputs from a single AES/EBU source.
    75 Ohm BNC Connectors Transformer balanced 75 ohm BNC connectors are provided on input and outputs.
    Accurate Regeneration - The DDA-124BNC will support and accurately regenerate digital audio from 27 to 96kHz.
    Specifications
    Input Connectors 1 x BNC transformer isolated, capacitor coupled, balanced and floating
    Input Level 200 mVp-p minimum
    Input Impedance 75?
    Terminating resistors may be switched in or out on rear panel via DIP switch
    Maximum Cable Length 3,281' (1,000 m) of 75? coax (with equalizer)
    Equalizer Multi-turn panel control, adjust using panel indicators
    Sample Rates Accepts 27 to 96 kHz
    Clock Regenerated from input signal with dual-mode PLL
    Clock Jitter < 3 nanoseconds peak-to-peak at 96 kHz sample rate
    Output Connectors 24 x BNC chassis mount
    Output Level 2Vp-p loaded @ 75?
    Output Impedance 75? unbalanced, capacitor coupled
    Output Jitter < 3 nanoseconds peak-to-peak at 96 kHz sample rate
    Propagation Delay 3 frames (sample intervals) at the current sample rate
    Power Internal, 115/230VAC ± 10%, 50/60Hz, 10VA
    IEC320 3-pin connector
    Dimensions (W x H x D) 19.02 x 1.77 x 7.52" (48.3 x 4.5 x 19.1 cm)
    1U rackmount
    Weight 7.05 lb (3.2 kg)