-40%
1 2 3 4 Gang Nail On Low Voltage Mounting Bracket Wall Plate New Construction
$ 5.05
- Description
- Size Guide
Description
1 / 2 / 3 / 4 Gang Nail-On Low Voltage Mounting BracketThe Low Voltage Mounting Bracket features shallow mounting depth which allows for more wires to be run in the wall cavities.
The shallow mounting depth also works better with reversible wall plates since the box itself is not obstructing the wire passage.
The new construction brackets are designed to have a front nail flange as well as a full outer flange for sheetrock to be backed up to ensuring proper support for the sheetrock and proper depth.
1-GANG BRACKET:
IMPORTANT: For Low Voltage Class 2 Use Only
Commonly Referred to as a Mud Ring
For New Construction Applications
Run More Wire Easier with Brackets vs Boxes
Mounts to Wood Studs with Supplied Nails
Impact Resistant Plastic results in less breakage on Job site
Flange around box supports sheetrock
Front Nail Holes for added box support
Integrated Cable Tie-Off Loop to Hold Cables behind Box
Shallow Mount - Only 0.55" Deep (Not Including Stud Side Nail Flange)
Minimum Sheetrock or Panel Thickness - 0.45"
Side Wall Thickness - 0.080"
Nailing Flange Thickness - 0.090" (Front and Side)
Panel Cut Out Dimensions - 2.15" W x 3.60" H
Overall Dimensions - 3.14" W x 5.34" H x 1.61" Depth
2-GANG BRACKET:
IMPORTANT: For Low Voltage Class 2 Use Only
Commonly Referred to as a Mud Ring
For New Construction Applications
Run More Wire Easier with Brackets vs Boxes
Mounts to Wood Studs with Supplied Nails
Impact Resistant Plastic results in less breakage on Job site
Flange around box supports sheetrock
Front Nail Holes for added box support
Two Front Flanges for Double Stud Support
Integrated Cable Tie-Off Loop to Hold Cables behind Box
Shallow Mount - Only 0.80" Deep (Not Including Stud Side Nail Flange)
Minimum Sheetrock or Panel Thickness - 0.45"
Side Wall Thickness - 0.080"
Nailing Flange Thickness - 0.090" (Front and Side)
Panel Cut Out Dimensions - 4.12" W x 3.60" H
Overall Dimensions - 5.5" W x 5.34" H x 1.61" Depth
3-GANG BRACKET:
IMPORTANT: For Low Voltage Class 2 Use Only
Commonly Referred to as a Mud Ring
For New Construction Applications
Run More Wire Easier with Brackets vs Boxes
Mounts to Wood Studs with Supplied Nails
Impact Resistant Plastic results in less breakage on Job site
Flange around box supports sheetrock
Front Nail Holes for added box support
Two Front Flanges for Double Stud Support
Integrated Cable Tie-Off Loop to Hold Cables behind Box
Shallow Mount - Only 0.80" Deep (Not Including Stud Side Nail Flange)
Minimum Sheetrock or Panel Thickness - 0.45"
Side Wall Thickness - 0.080"
Nailing Flange Thickness - 0.090" (Front and Side)
Panel Cut Out Dimensions - 5.9375" W x 3.60" H
Overall Dimensions - 7.75" W x 5.34" H x 2.625" Depth
4-GANG BRACKET:
IMPORTANT: For Low Voltage Class 2 Use Only
Commonly Referred to as a Mud Ring
For New Construction Applications
Run More Wire Easier with Brackets vs Boxes
Mounts to Wood Studs with Supplied Nails
Impact Resistant Plastic results in less breakage on Job site
Flange around box supports sheetrock
Front Nail Holes for added box support
Two Front Flanges for Double Stud Support
Integrated Cable Tie-Off Loop to Hold Cables behind Box
Shallow Mount - Only 0.80" Deep (Not Including Stud Side Nail Flange)
Minimum Sheetrock or Panel Thickness: 0.45"
Side Wall Thickness: 0.080"
Nailing Flange Thickness: 0.090" (Front and Side)
Panel Cut Out Dimensions: 7.75" W x 3.60" H
Overall Dimensions: 9.75" W x 5.34" H x 2.625" Depth